Page 1
PRODUCT INFORMATION
INTENDED USE OF THE TOOL
WARNING
DO NOT DISCARD – GIVE TO USER
1810302-14
3 PIECE PROPANE TORCH
QUICK CHANGE KIT
PTK3
Before use,
READ AND UNDERSTAND THE
WARNINGS
and check the parts diagram and part
number listing on page 2 to make sure all parts are
included. If any parts are missing or damaged, please
call your distributor.
BEFORE USE
Study, understand and follow all instructions provided
with this product. Read these instructions carefully
before installing, operating, servicing or repairing this
tool. Keep these instructions in a safe accessible place.
The PTK3 Propane Torch Kit is designed to be used with
the three included quick detach torch heads to heat,
braze and solder non-flammable materials and wiring.
Do not modify or replace any pieces of this kit with
foreign parts. Do not use these tools outside of the
designed intent. Never modify the tools for any other
purpose or use.
Made in Taiwan
to Matco specifications
Caution: To help prevent personal injury
• Use of this product can expose you to chemicals including
ethylene glycol, gasoline vapors and engine exhaust, which are
known to the State of California to cause cancer, birth defects,
or reproductive harm. For more information, visit
www.P65Warnings.ca.gov. Always wear ANSI approved safety
equipment, safety glasses and clothing when using this
product. Study, understand, and follow all instructions
provided with this product. Failure to read and follow all
warnings and operating instructions may result in damages
and serious injury or death.
• Always wear ANSI approved goggles when using this product.
(Users and Bystanders).
• Never use this tool for any application other than for which it
was designed.
• Only use accessories designed for this tool.
• Never alter or modify this tool in any way.
• Improper operation and/or maintenance of the tool,
modification of the tool, or use of the tool with accessories not
designed for it could result in serious injury or death.
• Always select the correct accessories of the
correct
size and
design for the job that you are attempting to perform.
• Always work in a clean, safe, well-lit, organized
and
adequately
equipped area.
• Do not begin repairs without assurance that
vehicle is in
secure
position, and will not move during repair.
WARNING
1 YEAR LIMITED WARRANTY
The manufacturer warrants this product to the original user
against defective material or workmanship for a period of 1
year from the date of purchase.
The manufacturer reserves the right to determine whether the
part or parts failed because of defective material,
workmanship or other causes. Failures caused by accident,
alteration or misuse are not covered by this warranty.
The manufacturer, at its discretion, will repair or replace
product covered under this warranty free of charge. Repairs or
replacements of products covered under this warranty are
warranted for the remainder of the original warranty period.
The manufacturer or its authorized service representatives
must perform all warranty repairs. Any repair to the product
by unauthorized service representatives voids this warranty.
The rights under this warranty are limited to the original user
and may not be transferred to subsequent owners.
The warranty is in lieu of all other warranties, expressed or
implied, including warranties of merchantability and fitness
for a particular purpose. Some states do not allow the
exclusion or limitations of incidental or consequential
damages, so the above limitations may not apply to you.
Innovative.
Three different attachments for
popular uses that can be changed even while
torch is running.
Universal.
Works on all 14-14.2 oz. Propane and
MAPP gas cylinders.
Effective.
Use the different attachments for
up to 3,670° F during brazing, soldering,
fastener heating and more.
