MTCBTDOGB, MTCBTDOGP
2
09/20/18
MTCBTDOGB, MTCBTDOGP DANCING DOG WIRELESS SPEAKER
Charging The Speaker
1. Plug the charger cable into the charge port.
2. Connect the charger to a USB power source. The red indicator light will display during charging. If charging
does not start, disconnect the charger and plug it in again. Charging the battery fully will take several hours.
3. When the battery is fully charged, the red indicator light will turn off. Disconnect the charger from the
USB power source and the Speaker.
Power Switch
To turn the power "ON", press and hold the power button until the indicator blinks blue. To turn the power "OFF", hold
the power button for 2 seconds until it turns off.
Pairing to Device
1. Power on the speaker, hold the power button for 2 seconds, the blue light will fast blink then enter pairing mode.
2. Use your wireless device to connect and pair to
DOG
. (If pass code is requested enter 0000)
* Once the speaker has been paired, it will automatically connect with your device, when they're both on.
Playing Wireless Music
1. Once the speaker is paired, the indicator will turn solid blue, it will slow blink when playing music.
2. Short press the "Play/Pause" button to pause, and press it again to resume play.
Turn On The Dancing
1. After paired, press the "Play/Pause" button to play music. The dancing feature will turn on automatically when
you start to play music for the first time.
2. Press dance "ON/OFF" “button” one time for quick paced dance, press again for slow dancing, then press again
for stop dance. (The dancing feature only turns on while the music is playing).
