MSC4RFA17
3
Rev. 08/04/17
Step 7:
Insert bottom shelf (Part # 23) between the four legs,
flat side facing up towards the ceiling. Insert sixteen
stove bolts (Part #1a) and completely tighten.
Step 8:
Mounting casters: Put the four casters in place. The
two locking casters (Part #12) should be on one side
of the cart, and the two non locking casters (Part #10)
should be on the other
(Left or right side, NOT
front or back)
. Using the 16 bolts (Part #9), washers
and fasteners (located in separate caster bag), com-
pletely tighten the casters to the bottom tray using a
13mm socket and 14mm combination wrench for the
bolt head. (Note: Bolt head and one washer should be
on the inside of the bottom shelf, nyloc nut and one
washer will be on the caster side.)
Step 9:
Carefully turn cart onto its casters.
Step 10:
Open top lid using the key provided.
Step 11:
Mount push handle/bracket assembly (Parts #5 & 6)
to the same side of the cart as the locking casters,
using the four stove bolts (Part #1b) provided. Finger
tighten at this time.
Step 12:
Insert the 4 Stove bolts (Part #4) provided to the
opposite side of the cart. Note: This stove bolt is shorter
due to not having to pass through a handle or bumper.
Step 13:
Insert the remaining 8 stove bolts (Part #1a).
ASSEMBLY INSTRUCTIONS
MSC4RFA17
Deluxe Service Cart
23
1a
10
12
9
TOOLS NEEDED FOR ASSEMBLY:
• 2 - 14mm Combination Wrenches
• 13mm Socket or Universal Socket
• 4" Extension
• 1/4" Ratchet
• #2 Phillips Screwdriver
(Step 11)
(Step 12)
5
1b
4
6
