Matco Tools MCL2038HIW Manual Download Page 2

MCL2038HIW, - G, - O 

03/27/19

MCL2038HIW 20V

+

 3/8" Brushless High Power Impact Wrench

SAVE THESE INSTRUCTIONS!

GENERAL SAFETY INFORMATION  

(FOR ALL BATTERY OPERATED TOOLS)

WARNING: 
 Read and understand all instructions. Failure to follow all 
instructions listed below, may result in electric shock, fire, 
explosion and/or serious personal injury. It is the responsibility 
of the owner to make sure all personnel read this manual 
prior to using the device. It is also the responsibility of the 
device owner to keep this manual intact and in a convenient 
location for all to see and read. If the manual or product labels 
are lost or not legible, contact Matco Tools for replacements. 
If the operator is not fluent in English, the product and safety 
instructions shall be read and discussed with the operator 
in the operator's native language by the purchaser/owner or 
his designee, making sure that the operator comprehends its 
contents.

Work Area Safety

•  Keep your work area clean and well lit . Cluttered benches and 
dark areas invite accidents .

•  Do not operate power tools in explosive atmospheres, such as in 
the presence of flammable liquids, gases, or dust . Power tools create 
sparks which may ignite the dust or fumes .

•  Keep bystanders, children, and visitors away while operating a 
power tool . Distractions can cause you to lose control and endanger 
others .

Electrical Safety

•  A battery operated tool with integral batteries or a separate 
battery pack must be recharged only with the specified charger for 
the battery . A charger that may be suitable for one type of battery 
may create a risk of fire when used with another battery .

•  Use battery operated tool only with specifically designated battery 
pack . Use of any other batteries may create a risk of fire .

Personal Safety

•  Stay alert, watch what you are doing, and use common sense 
when operating a power tool . Do not use tool while tired or under the 
influence of drugs, alcohol, or medication . A moment of inattention 
while operating power tools may result in serious personal injury .

•  Dress properly . Do not wear loose clothing or jewelry . Contain long 
hair . Keep your hair, clothing, and gloves away from moving parts . 
Loose clothes, jewelry, or long hair can be caught in moving parts .

•  Avoid accidental starting . Be sure switch is in the locked or "off" 
position before inserting battery pack . Carrying tools with your finger 
on the switch or inserting the battery pack into a tool with the switch 
on invites accidents .

•  Repetitive motions or exposure to vibration may be harmful to 
hands or arms .

•  Remove adjusting keys or wrenches before turning the tool on . A 
wrench or a key that is left attached to a rotating part of the tool may 
result in personal injury .

•  Do not overreach . Keep proper footing and balance at all times . 
Proper footing and balance enable better control of the tool in 
unexpected situations .

•  Use safety equipment . Always wear eye protection . Dust mask, 
non-skid safety shoes, hard hat, or hearing protection must be used 
for appropriate conditions .

Tool Use and Care

•  Do not use (or modify) the tool for any other purpose than that 
for which it was designed without consulting the manufacturer's 

authorized representative .

•  Use clamps or another practical way to secure and support the 
workpiece to a stable platform . Holding the work by hand or against 
your body is unstable and may lead to loss of control .

•  Do not force tool . Use the correct tool for your application . 

•  Do not use tool if switch does not turn it on or off . A tool that 
cannot be controlled with the switch is dangerous and must be 
repaired .

•   Disconnect battery pack from tool or place the switch in the 
locked or "off" position before making any adjustments, changing 
accessories, or storing the tool . Such preventive safety measures 
reduce the risk of starting the tool accidentally .

•  Store idle tools out of reach of children and other untrained 
persons . Tools are dangerous in the hands of untrained users .

•  When battery pack is not in use, keep it away from other metal 
objects like: paper clips, coins, keys, nails, screws, or other small 
metal objects that can make a connection from one terminal to 
another . Shorting the battery terminals together may cause sparks, 
burns, or a fire .

•  Check for misalignment or binding of moving parts, breakage of 
parts, and any other condition that may affect the tool’s operation . If 
damaged, have the tool serviced before using . Many accidents are 
caused by poorly maintained tools .

•  

Use only impact sockets and accessories that are 

recommended by the manufacturer for your model. Accessories 
that may be suitable for one tool may create a risk of injury 
when used on another tool.

•  Impact wrenches are not torque control devices .  Fasteners with 
specific torque requirements must be checked with suitable torque 
measuring devices after installation with an impact wrench .

•  Failure to heed these warnings may result in personal injury and/
or property damage .

Service

•  Tool service must be performed only by the MATCO authorized 
service centers listed . Service or maintenance performed by 
unqualified personnel may result in a risk of injury . Repair by 
unqualified personnel, use of unauthorized parts, and failure to follow 
maintenance instructions may create a risk of shock or injury .

SAVE THESE INSTRUCTIONS!

SPECIFIC SAFETY RULES

 

DO NOT let comfort or familiarity with product replace strict 
adherence to cordless product  safety rules. If you use this tool 
unsafely or incorrectly, you can suffer serious personal injury.

•  Hold tool by insulated gripping surfaces when performing an 
operation where the accessories may contact hidden wiring . Contact 
with a “live” wire will also make exposed metal parts of the tool 
“live” and shock the operator .

•  Be aware that this tool is always in operating condition, because it 
does not have to be plugged into an electrical outlet .

•  Always be sure you have firm footing .

•  Be sure no one is below when using the tool in high locations .

•  Hold the tool firmly and use both hands .

FAILURE TO OBSERVE THESE WARNINGS COULD RE SULT IN IN JU RY.

WARNING

WARNING: 

This product can expose you to chemicals 

including phthalates, which is known to the State 

of California to cause cancer and birth defects or 

other reproductive harm. For more information go to  

www.P65Warnings.ca.gov.

Summary of Contents for MCL2038HIW






















Reviews: