background image

Page 1

PRODUCT INFORMATION:

Study, understand and follow all instructions provided with 
this product. Read these instructions carefully before installing, 
operating, servicing or repairing this tool. Keep these 
instructions in a safe accessible place.

INTENDED USE OF THE TOOL

Caution: To help prevent personal injury

WARNING

WARNING

DO NOT DISCARD – GIVE TO USER

The manufacturer warrants this product to the original user 
against defective material or workmanship for a period of 1 
year from the date of purchase.
The manufacturer reserves the right to determine whether 
the part or parts failed because of defective material, 
workmanship or other causes. Failures caused by accident, 
alteration, or misuse are not covered by this warranty.
The manufacturer, at its discretion, will repair or replace 
product covered under this warranty free of charge. Repairs 
or replacements of products covered under this warranty are 
warranted for the remainder of the original warranty period.
The manufacturer or its authorized service representatives 
must perform all warranty repairs. Any repair to the product 
by unauthorized service representatives voids this warranty. 
The rights under this warranty are limited to the original user 
and may not be transferred to subsequent owners.
The warranty is in lieu of all other warranties, expressed or 
implied, including warranties of merchantability and fitness 
for a particular purpose. Some states do not allow the 
exclusion or limitations of incidental or consequential 
damages, so the above limitations may not apply to you. 

• Normal use of this product is likely to expose the user to 

dust and/or microscopic particles containing chemicals 
known to the State of California to cause cancer, birth 
defects or other reproductive harm. Always wear 
appropriate safety equipment and clothing when using this 
product. Study, understand and follow all instructions 
provided with this product. Failure to read and follow all 
warnings and operating instructions may result in damages 
and serious injury or death.

• Always wear ANSI approved goggles when using 

this 

product. (Users and by standers).

• Never use this tool for any application other than for which 

it was designed. 

• Only use accessories designed for this tool.
• Never alter or modify this tool in any way.
• Improper operation and/or maintenance of the tool, 

modification of the tool, or use of the tool with accessories 
not designed for it could result in serious injury or death.

• Always select the correct accessories of the correct size and 

design for the job that you are attempting to perform.

• Always work in a clean, safe, well-lit, organized and 

adequately equipped area.

• Do not begin repairs without assurance that vehicle is in 

secure position, and will not move during repair.

  1 YEAR LIMITED WARRANTY

1605093-14

3.5" DIGITAL TIRE INFLATOR

WITH HOSE

DT4B

Unit designed to inflate, deflate and measure tire pressure. Do 
not use this tool outside of the designed intent. Never modify 
the tool for any other purpose or use.

When unpacking, check the parts diagram and part number 
listing on page 10 to make sure all parts are included. If any 
parts are missing or damaged, please call your distributor. 

BEFORE USE

MADE IN CHINA

Specifications:

3 - 175psi

PSI / BAR / KPA / KGF

0.1 PSI

Compliance with European Community 

Council Directive 86/217/EEC

0 - 58 psi +/- 1.2 psi

59 - 174 psi +/- 2.0 psi

32°F - 104°F (=0°C - 40°C)

AAA Battery 

560hr

FUNCTION KEY:

TWIST/THREAD CHUCK ONTO VALVE STEM TO FULLY SEAL

Improved battery design. 

AAA batteries provide 4X the battery 

life and simplified installation.

Dependable. 

21" stainless braided hose for increased durability.

M

aximum accuracy. 

0.1 PSI resolution for use with TPMS systems.

Displays KGF, PSI or BAR measurement.
Large face backlit LCD digital read-out.
Unit covered with rubber sleeve for extra comfort and durability. 
Two position lever. 1st position deflates, 2nd position inflates.
Easy Change Chuck System.
Works on with nitrogen systems and CO

2

.

Measuring Range:

Units:

Resolution:

Accuracy:

Working Temperature:

Power:

Battery Lifetime:

Press once to turn on. Press again to turn on backlight. 

When the unit is on, press for 3 seconds to switch units.  

If display is unreadable or will not change, press and 

hold the button for 8 seconds to restart.

ON/UNIT/LIGHT:

Includes

2 AAA batteries

Summary of Contents for DT4B











Reviews: