Matchless 1964 G12 650, Instruction Book, Page: 72 / 104

Illustration 38
Showing brake r o d adjustment exhausted, indicating the need f o r brake t h r u s t
pin adjustment.
BRAKE PEDAL ADJUSTMENT
The pedal is located by a spring-loaded sprag which lies between the stop on the pedal
and the leg of hair pin spring.
To adjust the position of the pedal: slacken the spindle nut on the right hand side of the
machine; move the pedal to the desired position; hold the pedal in this position and
tighten the spindle nut.
The most suitable position for normal use is, with the brake "OFF", for the pedal just
to be clear of the footrest rubber.
After altering the pedal position, check the rear brake adjustment.
If the position of the brake pedal is altered, re-set the stop lamp switch, which is
adjustable,
Pedal Position Adjustment
Illustration 39
70
70