ETC Report No. : 16-09-RBF-027
Sheet 10
of 36 Sheets
FCC ID:
2AC96WDP
10
4.3 Measuring Instrument
The following instrument are used for radiated emissions measurement:
Equipment
Manufacturer
Model No. Calibration Date Next Cal. Date
Test Receiver
Rohde & Schwarz
ESCI
2016/09/07
2017/09/06
EMI Test Receiver
Rohde & Schwarz
ESL
2016/03/26
2017/03/25
Bi-Log Antenna
ETC
MCTD 2786
2016/07/15
2017/07/14
Log-periodic Antenna EMCO
3146
2015/11/17
2016/11/16
Double Ridged Guide
Horn Antenna
EMCO
3116
2016/10/05
2017/10/04
Biconical Antenna
EMCO
3110
2015/11/17
2016/11/16
Double Ridged
Antenna
EMCO
3115
2016/10/05
2017/10/04
Amplifier
HP
8449B
2016/07/18
2017/07/17
Amplifier
HP
83051A
2016/07/18
2017/07/17
Amplifier
HP
8447D
2016/09/26
2017/09/25
EMI Test Receiver
Rohde & Schwarz
ESU 40
2016/10/07
2017/10/06
LOOP Antenna
EMCO
6512
2015/10/12
2016/10/11
Measuring instrument setup in measured frequency band when specified detector function is
used :
Frequency Band
(MHz)
Instrument
Function
Resolution
bandwidth
Video
Bandwidth
30 to 1000
RF Test Receiver
Quasi-Peak
120 kHz
N/A
Spectrum Analyzer
Peak
100 kHz
100 kHz
Above 1000
Spectrum Analyzer
Peak
1 MHz
1 MHz
Spectrum Analyzer
Average
1 MHz
10 Hz or
≥ 1/T
(Note 1)
Note 1:
VBW = 10 Hz, when the duty cycle is no less than 98%.
VBW ≥ 1/T, when duty cycle is less than 98% where T is the minimum transmission duration
over which the transmitter is on and is transmitting at its maximum power control level for the
tested mode of operation.
