Safety Procedures
Before reading this Technical Note, please refer to the section on
Safety Procedures in the Barak User's Manual.
About this Technical Note
This Technical Note describes the procedure for replacing the PLCs
on the
Barak
printer.
Barak's PLCs
There are two PLCs (P
ROGRAMMABLE
L
OGIC
C
ONTROLLERS
) installed
on the printer:
•
The M
ACHINE
PLC is installed to the left of the P
OWER
S
WITCH
, at the rear right corner of the printer, as shown
in the figure below.
The Machine PLC
The Machine PLC
•
The B
LOCK
PLC is installed at the top rear of the
C
ARRIAGE
, as shown in the following two figures:
The Block PLC
The Block PLC – general view
10100142 - A
© Matan Digital Printers Ltd.
Page 2 of 8