CUT OUT DIMENSIONS
The cut out must be made from non-combustible material only.
INSTALLATION
The 400mm tall, non-combustible rear splashback is not necessary provided there
is no combustible material within 500mm of the rear of the BBQ.
If the BBQ is supplied with a duplicate data label, apply this label in the immediate
vicinity of the BBQ in an easily accessible area.
Combustion air openings are at various locations around the BBQ firebox. The
cutout dimensions explained above must be met to ensure there is adequate space
for entry of air for satisfactory combustion.
Gas vapour is highly explosive and can cause serious bodily injury or damage to
property if allowed to accumulate in a confined space and ignited. If you choose
to build an enclosure to house an LPG cylinder, at least one side of the enclosure
shall be completely open, and ventilation must meet the minimum requirements of
AS5601.1.
INSTALLATION
WITHOUT
SIDE BRACKETS
The side brackets can be removed if preferred.
In this case, the BBQ shall rest on the built in
rails below the BBQ.
INSTALLATION
WITH
OPTIONAL
SIDE BRACKETS
The side brackets allow a simple method of
installation where the BBQ can simply rest on
two pillar like structures.
