START-UP
FIRST-TIME USE OF THE APPLIANCE
Important!
Before using the appliance for the first time, thorou-
ghly clean the tank with lukewarm water and deter-
gent, using a soft cloth to eliminate all traces of swarf;
dry with a clean cloth.
IGNITION
Turning the pilot burner on (Fig. 4)
Press knob (4) and turn it to the left
.
Keep the knob pressed down while repeatedly pressing
piezo ignition button (6) until you can see through aperture
(10) on the combustion chamber that the flame has caught.
Keep the knob pressed down for another 15-20 seconds;
if the flame goes out after the knob is released, start again.
Turning the main burner on and
adjusting the temperature (Fig. 4)
To light the main burner, turn the knob to the right until it is
on ‘high’
, or else continue until it reaches low
; the
heating capacity must be set between these two positions.
TURNING THE APPLIANCE OFF
Turning the appliance off during
normal operation
To turn the main burner off only, simply turn the knob
to
; this way only the pilot burner will stay on.
To turn the appliance off completely, turn the knob to
●
;
this will turn the pilot burner off as well.
Turning the appliance off in an
emergency
In an emergency turn off the gas supply.
What to do if something goes wrong
or if not using the appliance for a
long time
If the appliance is not to be used for a long time, or if it
breaks down or works incorrectly, close the tap to the gas
mains located outside the appliance. clean thoroughly
(see cleaning and protection of steel).
If anything goes wrong, call the aftersales department.
USING THE APPLIANCE
052-03 - Gas pasta cooker
10
6
3
5
9
4
