USER OPERATING INSTRUCTIONS, SWITCHING ON
Pasta cookers are appliances designed for cooking food and should be exclusively used by
trained personnel following these operating instructions. Any other use of the appliance is to
be considered improper and therefore dangerous.
Before introducing food in the tank, you are advised to clean it carefully; wash with water and
common detergents, then rinse well.
3 PUTTING INTO OPERATION
CAUTION: The appliance should only be used under the operator’s surveillance!!!
The appliance must not be used with a water level below the basket support placed inside
the tank.
The user must make sure that the pavement on which the pasta cooker is installed is fitted
with a floor drain to collect the water drained off from the tank overflow pipe.
3.1 SWITCHING ON
Make sure that the water drainage valve is closed. Fill the tank with water up to the maximum
level (overflow opening), turn on the power by switching on the main switch installed ahead
of the appliance.
Rotate selector switch to the desired position 1, 2 or 3. The green pilot lamp indicates that
the appliance is switched on.
Note: Rotating the knob to position “1” the pasta cooker will function at minimal power; to
position “2” it will function at two thirds power and in position “3” it will function at full power.
