Mastervolt IVO SMART 12/30-2, User Manual, Page: 14 / 24

14
IVO Smart Appendix A
DATA SHEETS
Set points register Setpoint
1 Min. bulk time 4 min.
2 Temperature variation 5.0 mV/C
3 Return to bulk time 30 sec.
4 Return to bulk voltage 13.00 V
5 Max. bulk/abs time 360 min.
6 Min. abs time 45 min.
7 Return Amps 2.5 Amps
8 Max. charge current 30 Amps
9 Bulk voltage 14.55 V
10 Abs voltage 14.35 V
11 Float voltage 13.30 V
12 Forced to float voltage 13.25 V
13 Gel voltage setting 55 mV
14 Diode compensation setting 60 mV
15 DC high alarm on 15.00 V
16 DC high alarm low 14.50 V
17 DC low alarm on 10.00 V
18 DC l ow alarm off 11.00 V
19 Alarm delay time 30 sec.
20 Reset data WWYY
21 Battery identification no 00
• Temperature variation
5.0 mV/
°
C per cell
• Reference voltage 25 ° C
• Battery charging is not allowed
above +50
°
C and under -20
°
C
• 24 Volt 60 mV/
°
C
5.0 mV/
°
C
Uref 25
°
C
forced floatgel/wet battery diode compensation
standard IUoUo characteristic
IUoUo char. increased with 0.6V
IUoUo char. high float level
IUoUo char. high float, increased with 0.6
IU char. low float level
IU char. low float, increased with 0.6V
IU char. high float level
IU char. high float, increased with 0.6 V
TEMPERATURE COMPENSATED CHARGING
charging voltage in V
15.0
14.5
14.0
13.5
13.0
12.5
12.0
-30 -20 -10 0 10 20 30 40 50 60
battery temperature in
°
C
float
absorption
25
°
C reference
temperature
MAX. BULK/ABS TIME
BULK TIME
TOTAL CHARGE TIME CYCLE ABS TIME FLOAT TIME
NEW CYCLE
min. bulk time min. abs time
return to bulk time
MAX. OUTPUT VERSUS INPUT VOLTAGE
current in
Amps
input voltage
50
80 100 120 140 160 180 200 220 240 260
25
°
C reference
temperature
25
°
C reference
temperature
0 44 50
output current in Amps
Tamb= 25
°
C
charging voltage in V
CHARGING CHARACTERISTICS
30