Linear 4V Radius 4V
Operation Manual
Rear panel controls
8
4:
Rear panel controls
MASTER OUT
- Output level is +14dBu when the MASTER level control is
fully clockwise and the VU meters read -4VU. The XLR output is designed
to operate with balanced equipment such as powered monitor speakers and
amplifiers.
AUX SEND & RETURN/INSERT
– The AUX SEND & AUX RETURN system has ¼”
TRS (balanced) jack sockets for connection to an external FX unit. The
SEND is connected to the FX units’ input, and the FX units’ output is
connected to the RETURN, (see USING THE EXTERNAL SEND & RETURN SYSTEM).
INSERT ON BUTTON
- Reconfigures the Aux Return Jacks as a Mix Buss
Insert, giving the user unparalleled flexibility for FX integration at
the press of a button (see USING THE EXTERNAL SEND & RETURN SYSTEM).
GROUND POST
- Unscrew the knurled nut, attach the turntable(s) ground
lead(s), and screw back into place without over-tightening the nut.
RECORD OUT
– Twin RCA sockets enable the user to make a stereo recording
of a performance. The overall volume of the Master Output does not
affect the Record Out function—this outputs at -6dBu.
BOOTH OUT
- The ¼” TRS (balanced) Jack Booth Output feeds the DJ’s booth
(local Monitor) amplifier/loudspeaker system.
POWER SWITCH
– “O” = OFF. Press the “–“ to power the mixer ON with the
external power supply connected.
POWER INPUT SOCKET
– Connect the external 18-19V power supply to the
input socket as labelled on the rear panel.
CH ONE-CH FOUR
– ALL four LINE and PHONO inputs feature twin (Left
& Right) RCA Phono Sockets. The PHONO input provides gain and RIAA
equalisation for turntable cartridges on CH ONE-CH FOUR. The LINE inputs
on CH ONE-CH FOUR provide input for CD players.
(Linear 4V shown)