Press the "off" button, PDT-1000W will switch off power, unsaved data will be lost at all.
Press the "restart" button, PDT-1000W will restart, unsaved data will be lost at all.
While PDT-1000W is in sleep mode, press the
button, the device will wake up and enter into
running state, the processor will run, the scanning module will work, as well as all wireless communication
modules.
2.2: scan barcode
While PDT-1000W is on running mode, press the
button, the barcode scan jet start work and
emission scanning beam. While complete barcode scanning, the buzzer will emit a short beep, and the scan
status indicator flashes, indicates that the scan is successful.
Barcode scanning features can be turned on/off manually by setting the [barcode scanning] under the
[Control Panel], please refer to Chapter 16 of manual barcode scanning settings.
Barcode scanning features can also be turned on/off by the users’ application over the API interface,
please refer to the "PDT-1000W application development manual”.
2.3: keyboard input state switch
Press button
can switch keyboard mode among digital mode, uppercase mode, lowercase letter
mode and extended mode; while under the digital mode, uppercase mode, lowercase letter mode, press any
button will generate keyboard function which marked on the button itself; while under the expansion mode,
press any button will generate keyboard function which marked at the top right of that button.
To view the current keyboard mode, you can check the keyboard mode icon on the status bar of the
Windows CE.NET operating system desktop.
for the digital mode,
for uppercase mode,
for
lowercase letters mode, and
for extended mode.
You can obtain or change the current keyboard mode by users’ application over the API interface, ,
please refer to the "PDT-1000W application development manual.
2.4: adjust the brightness of the LCD screen.
Press the button
, switch the keyboard to the extended mode
, then press the button
can
increase the brightness of the LCD, press the button
to lower the LCD brightness.
2.5: Set the keyboard operation tone
Press the button
, switch the keyboard to the extended mode
, then press the button
can
turn the keyboard operational tones on, this feature makes the buzzer beep when press any key; and press
the button
again, the operational sounds is switched off.
2.6: Set the keyboard backlight
Press the button
, switch the keyboard to the extended mode
, then press the button
can
