3.5: PC Connection
In the Control Panel, double-click the "PC Connection" icon will display
"PC Connection Properties” window, set the connection between
PDT-1000W and PC, e.g. a USB or serial connection.
Select “Enable PC connected directly ", allows PDT-1000W connect to
PC;
Window displays the current connection, in case need to change the
connection mode, press the "Change the connection ..." button in the
pop-up "Change Connection" window, select the connection mode.
3.6: Stylus
Double-click the "Stylus" icon on the Control Panel, Stylus Properties
window will display, set the parameters of the touch screen; this window
contains two tabs of the "double-click" and "calibration".
Double-Click
In the "double" tab, you can set the double-click speed and distance of
the touch screen;
Double-click the grid icon above at the right speed and distance that you
feel correct, you can set the recognition standard of double-click speed
and distance of the touch screen; by double-clicking the icon of the wedge plate below, you can test the
above settings is appropriate.
Calibration
"Calibration" tab can relocate a point on the touch screen, when click a
point on the touch screen, but the screen response with the deviation,
you can use this feature.
Press the "recalibration" button, calibration window will display. Use
stylus to tap the center point of the target window.