page 3
The purpose of safety symbols is to attract your attention to possible dangers. The safety
symbols and the explanations with them deserve your careful attention and understanding.
The symbol warnings do not, by themselves, eliminate any danger. The instructions and
warnings they give are no substitutes for proper accident prevention measures.
WARNING:
Be sure to read and understand all safety instructions in this manual,
including all safety alert symbols such as “DANGER,” ”WARNING,” and “CAUTION” before
using this auto hammer . Failure to following all instructions listed below may result in
electric shock, fire, and/or serious personal injury.
Symbol
Signal
Meaning
DANGER!
Indicates an imminently hazardous situation, which, if not
avoided, will result in death or serious injury.
WARNING!
Indicates a potentially hazardous situation, which, if not
avoided, could result in death or serious injury.
CAUTION!
Indicates a potentially hazardous situation, which, if not
avoided, could result in minor or moderate injury.
NOTE:
(Without Safety Alert Symbol) Indicates a situation that may
result in property damage.
WARNING:
To ensure safety and reliability, all repairs should be performed by a
qualified service technician.
WARNING:
The operation of any power tool can
result in foreign objects being thrown into your eyes, which
can result in severe eye damage. Before beginning power
tool operation, always wear safety goggles or safety glasses
with side shields and a full-face shield when needed. We
recommend a Wide Vision Safety Mask for use over eyeglasses
or standard safety glasses with side shields. Always use eye
protection which is marked to comply with ANSI Z87.1
SAVE THESE INSTRUCTIONS
Some of these following symbols may be used on this tool. Please study them and learn
their meaning. Proper interpretation of these symbols will allow you to operate the tool
better and safer.
The label on your tool may include the following symbols.
V..............................................................................................................................................Volts
A.............................................................................................................................................Amps
Hz...........................................................................................................................................Hertz
W............................................................................................................................................Watts
min......................................................................................................................................Minutes
~........................................................................................................................Alternating Current
.............................................................................................................................Direct Current
n
o
............................................................................................................................No-load Speed
....................................................................................................................Class II construction
.../min.........................................................................................Revolutions or Strokes per minute
SAFETY SYMBOLS FOR YOUR TOOL
