background image

Page 11

OPERATION

kEyLESS CHUCk (FIG. 7)

The arrows on the chuck indicate the 
direction of rotation of the body of the chuck 
to: GRIP (tighten) or OPEN (release) the jaws 
of the chuck on the drill bit .

bIT STORAGE (FIG. 8)

When not in use, the bit may be stored on 
either side of the cordless drill/driver by 
snapping the bit into place in one of the bit 
clips .

TWO-SPEED GEAR bOX (FIG. 9)

This drill/driver features a two-speed 
gearbox that is designed for drilling or 
driving at LO speed or HI speed . A slide 
switch is located on the top of the cordless 
drill/driver to select either LO or HI speed . 

When using the cordless drill/driver in the 
LO speed range, the speed will decrease 
and the cordless drill/driver will have more 
power and torque . 

When using the cordless drill/driver in the 
HI speed range, the speed will increase and 
the cordless drill/driver will have less power 
and torque . 

Use LO speed for high power and torque 
applications, and use HI speed for fast 
drilling applications .

NOTICE:

 Do not change between LO speed 

and HI speed while the tool is running . 
Failure to obey this caution could result in 
serious damage to the cordless drill .

17  19  21  23

FIG. 7

Keyless 
Chuck

Grip

Release

FIG. 8

Bit storage

1  3  5  

1  3  5  

FIG. 9

Slide Switch

Summary of Contents for 241-0409





















Reviews: