MasterForce 241-0409, Operator'S Manual, Page: 10 / 20

Page 9
3 . Pull forward on the battery pack to
remove it from the drill/driver .
TRIGGER SWITCH (FIG. 3)
To turn the Drill/Driver ON, depress the
trigger switch .
To turn it OFF, release the trigger switch .
VARIAbLE SPEED (FIG. 3)
The variable-speed trigger switch delivers
higher speed with increased trigger pressure
and lower speed with decreased trigger
pressure .
DIRECTION-OF-ROTATION SE-
LECTOR (FORWARD/CENTER-
LOCk/REVERSE) (FIG. 4)
OPERATION
TO ATTACH bATTERy PACk
(FIG. 2)
CAUTION:
Avoid the possibility of
accidental starting . Always take care not
to activate the trigger switch when you are
attaching the battery pack or performing
other adjustments to the tool .
1 . Place the direction-of-rotation selector
in the center (locked) position .
2 . Align the raised portion on the battery
pack with the grooves on the bottom of
the drill/driver, and then slide the battery
pack onto the drill/driver as shown .
3 . Make sure that the latch on the battery
pack snaps into place and the battery
pack is secured to the drill/driver before
beginning operation .
NOTICE:
When placing the battery pack on
the tool, be sure that the raised rib on bat-
tery pack aligns with the groove on the drill/
driver and the latches snap into place prop-
erly . Improper assembly of the battery pack
can cause damage to internal components .
TO DETACH bATTERy PACk
1 . Place the direction-of-rotation selector
in the center (locked) position . .
2 . Press the battery-release button to
release the battery pack .
FIG. 2
ATTACH
DETACH
FIG. 3
Variable
Speed
Trigger
Switch
Direction-
of-Rotation
Selector
FIG. 4
Forward Reverse