6
EZM1000 - 2000
R
2 Safety..3 Main components.
Work environment
• Keep the work environment clean and neat.
• Use dry, filtered and with anti-corrosive oil
lubricated air. If not available, put 0.1 ml
(approximately 5 drops) of anti-corrosive
lubricating oil in air connection of tool three
times each operating day.
• Work in a frost-free environment.
• The connection to the tools is G¼“.
A connection nipple has not been included.
Provide an appropriate solution yourself.
Set a constant air pressure to 5 - 7 bars
(maximum 7 bars).
2 Safety..4
Tools
Never use the tools
- when the nose piece/front sleeve (A) is
missing;
- when the mandrel collector (B) has not
been positioned
• Check the tools for damage before connecting
the air pressure.
• Keep the tools in an optimum condition.
• Switch off the closing valve (C) when the tools
are not used.
• Make sure that the flexible connection hose (D)
is not pressurised when disconnecting.
• Do not modify the tools in any way.
• Only use the device for appropriate purposes.
2 Safety..5
Serial number
This is the place of the serial number (A) of the
tools.
2.6
Type identification
This is the place of the type identification (B) of
the tools.
25
0 bar
20
05
10
0
15
A
B
C D
G¼"
25
5-7 bar
20
05
10
0
15
XXXXX
EZM XXXX
A
B
