Traction Cable
To Remove Traction Cable:
1)
Remove the upper cover.
2)
Loosen the security dowel located on
the cable fixing pin.
3)
Pull the cable out of the fixing pin and
remove the adjustment screw mounted on
the handle.
4)
Press the handle and pull the cable out
of its sheath.
To Install NEW Traction Cable:
1)
Fit one end of the
NEW
cable into the
handle adjustment screw (i.e. the end
without the blocking ball).
2)
Insert the cable into its sheath.
3)
Hook the blocking ball to the handle.
4)
Slot the cable through the turned
adjustment screw, secured to the frame
and then through the fixing pin.
5)
Tighten the security dowel. Adjust the
cable with the two adjustment screws.
Side Brush Lifting Cable
To Remove Side Brush Cable:
1)
Remove the upper cover and the front
waste bin.
2)
Remove the front bumper, right wheel
and right side guard.
3)
Loosen the cable clamp.
4)
Loosen security dowel on the fixing pin.
5)
Remove the handle from the support
and open it up.
6)
Pull the cable out of the two sheaths.
To Install NEW Side Brush Cable:
1)
Put the cable inside the handle.
2)
Close handle and fix it to the support.
3)
Insert the cable into its sheath.
4)
Secure one end of the cable in place
with the clamp and the other end with the
fixing pin.
5)
Adjust cable with the two adjustment
screws.
R
EPLACING
T
RACTION AND
S
IDE
B
RUSH
C
ABLES
P
AGE
10
R
OUTINE
M
AINTENANCE
_____________________________________________________
Maintenance
On
Every
Every
Every
Check List
Delivery
10 Hrs
50 Hrs
100 Hrs
_____________________________________________________
Check Battery Liquid
X
X
Check Belts
X
Grease in the Reduction Unit
X
X
Tighten Nuts and Screws
X
Brushes for Wear
X
Gaskets for Leaks and Wear
X
Check that parts are in working order
X
_____________________________________________________
Always turn OFF the sweeper before performing any maintenance.
All maintenance must be carried out by competent
personnel or an authorized service center.
C
AUTION
:
When washing off the scrubber DO NOT use a Jet of Water.
The cover and bin MUST be remover before cleaning.
W
ARNING
:
