unintentionally contacted.
WARNING:
The operation of any tool can result in foreign objects being propelled into
the eyes, which could result in severe eye damage. When operating a power tool, always wear
safety goggles or safety glasses with side shields or a full face shield, if necessary.
Check for damaged parts.
Before further use of the tool, a guard or other part that is damaged
should be carefully checked to determine that it will operate properly and perform its intended
function. Check for alignment of moving parts, binding of moving parts, breakage of parts, mounting,
and any other conditions that may affect the operation of the tool. A guard or other part that is
damaged should be properly repaired or replaced.
Never leave the tool unattended while the power is “on.” Turn the power “off.”
Do not leave
the tool until the blade has come to a complete stop and the mitre saw has been unplugged.
Do not over-reach.
Keep proper footing and balance at all times.
Maintain tools with care.
Keep tools sharp and clean for optimum performance. Follow instructions
for lubricating and changing accessories.
CAUTION:
Do not attempt to operate this tool until having thoroughly read all instructions,
safety rules, and warnings. Failure to comply can result in fire, electric shock, or serious personal
injury. Retain the Operating Manual for future reference and review it frequently.
WARNING:
Dust generated from certain materials can be hazardous to one’s health. Always
operate the saw in a well-ventilated area and provide for proper dust removal.
4
Summary of Contents for 55-6847-0
Page 21: ...21 ...
