Weekly Maintenance
Inspect the vacuum motor inlet filter. Snap filter
retainer out of it's fitting. Remove the filter and clean
it by vacuuming or shaking.
Replace with new filter if uncleanable or torn.
Replace filter in retainer and snap in place in the vac-
uum housing.
DO NOT o
perate vacuum without motor
inlet filter in place. (See Fig J)
Monthly Maintenance
Inspect brush strip for wear. If worn to the point
where it no longer touches the carpet, it must be
replaced.
To Replace Brush Strips:
Remove the phillips head screw holding the brush
access plate in place on the end of the brush exten-
sion. Slide the strip out and replace with a new one.
Make sure brush strip is pushed all the way in.
Replace the access door. (See Figs K & L)
Annual Maintenance
Motor brushes in the vacuum and brush motor must
be inspected for wear.
M
M
AINTENANCE
O
O
F
T
T
HE
V
V
ACUUM
P
AGE
7
S
Stte
ep
p O
On
ne
e
Remove wand by snapping it out of the retainer clip
and pulling from the inlet in the base. The brush
motor will automatically stop when the wand is
removed.
S
Stte
ep
p T
Tw
wo
o
Attach the tool of your choice to the wand and start
cleaning.
NOTE:
When replacing the wand, make sure that it
fits tightly into base inlet for proper performance.
O
O
PERATION
II
NSTRUCTIONS
F
F
OR
A
A
BOVE
F
F
LOOR
C
C
LEANING
C
AUTION
:
Brushes should be replaced only by authorized maintenance personnel.
C
C
AUTION
::