MasterCraft 062-3535-2, Instruction Manual, Page: 14 / 17

• Risk of electric shock, fire or serious injury and/or death. Do not handle a pump or pump motor
with wet hands or when standing on a wet or damp surface or in water.
• Risk of electric shock, fire or serious injury and/or death. Before attempting to check why the
unit has stopped operating, disconnect power from the unit.
DANGER!
• The shaft seal depends on water for lubrication. Do not operate the pump unless it is submerged
in water as the seal may be damaged if allowed to run dry.
• The motor is equipped with an automatic reset thermal protector. If temperature in the motor
should rise unduly, the switch will cut off all power before damage can be done to the motor.
When the motor has cooled sufficiently, the switch will reset automatically and restart the motor.
If the protector trips repeatedly, the pump should be removed and checked. Low voltage, long
extension cords, clogged impeller, very low head or lift, a plugged or frozen discharge pipe,
etc., could cause the protector to trip.
• The pump will not remove all water.
OPERATION
14
OPERATING INSTRUCTIONS
model no. 062-3535-2 | contact us 1-800-689-9928