MasterCraft 062-3422-0 Instruction Manual Download Page 5

5

SAFETY

SAFETY
WARNING

• 

This pump is not submersible! Do not stand in water while this pump is plugged 

in, and do not get the motor wet as it could cause electrocution, which could 
lead to serious injury or death.

• 

Always make sure the pump is unplugged as soon as the water level reaches 

1/8" (3.2 mm). At water levels less than 1/8" (3.2 mm), the pump is attempting 
to pump air, which will cause the pump to overheat and wear out. Running the 
pump without sufficient water will damage the pump and void the pump's 
warranty.

• 

When the pump is running dry, it will be EXTREMELY LOUD. This is a sign to 

unplug the pump.

• 

You must use the included clear suction hose on the inlet of this pump, as 

marked on the pump.

• 

Always use the suction strainer included with this pump to prevent debris from 

damaging the pump.

• 

Do not pump flammable or explosive liquids such as oil, gasoline, kerosene, 

ethanol, etc. Do not use in the presence of flammable or explosive vapours. 
Using this pump with or near flammable liquids can cause an explosion or fire, 
resulting in property damage, serious personal injury and/or death.

• 

Always disconnect the pump from its power source before inspection.

• 

Do not stand in water when the pump is connected. Do not handle pump with 

wet hands.

• 

Do not touch the pump housing while it is operating, as the pump may be HOT 

and can cause serious skin burns.

CAUTION

• 

This pump is designed to pump only water. This pump is designed for portable 

applications. It can drain or remove water from the following: flooded areas, 
pool covers, clogged sinks, waterbeds, water basins, boats, stock tanks, etc. It 
can also be used to fill tanks or water beds. This pump has not been tested or 
approved for use in swimming pools or in salt-water marine areas. This pump 
should not be used as a replacement for a sump pump.

• 

This pump cannot be used in sewage applications. Doing so will void warranty.

• 

This pump is made of high-strength materials. It will provide trouble-free service 

for many years when properly installed, maintained, and used. However, 
inadequate electrical power to the pump, or blockage by ice, dirt, or debris may 
cause the pump to fail, potentially bringing about additional water damage. To 
minimize the potential for water damage due to pump failure, please read the 
section of this manual regarding common pump problems and remedies or call 
1-800-689-9928.

Summary of Contents for 062-3422-0












Reviews: