headline bars
continuation tabs
notes
warnings
12
model no. 060-1349-2 | contact us 1-800-689-9928
MOUNTING THE GUARD
(fig 3-fig 4)
1. Remove the battery pack from the trimmer.
2. Lift the trimmer head and face it upward; align the
groove on the bottom of the guard with the raised
portion on the base of the trimmer head, and then
slide the guard onto the base
(fig 3)
.
3. Make sure that the two mounting holes in the guard
are aligned with the two assembly holes in the base
of the shaft. Insert a screw into each washer, and
then lock the guard in place by tightening the two
screws with the included wrench
(fig 4)
.
OPERA
TING INSTRUCTIONS
WARNING!
• Always wear gloves when mounting or replacing the guard. Be careful of the blade on the guard and protect your hands from
being injured by the blade.
FPO
fig 3
Trimmer head
Guard
fig 4
Washer
Screw