background image

W

ARRANTY

29

AIR

-

POWERED COIL ROOFING NAILER  058

-8179-2

Mastercraft

®

 limited warranty

These warranties are subject to the following conditions and limitations:

a. A bill of sale verifying the purchase and purchase date must be provided.

b. This warranty will not apply to any product or part thereof which is worn or broken or which 

has become inoperative due to abuse, misuse, accidental damage, neglect, or lack of proper 
installation, operation, or maintenance (as outlined in the applicable instruction manual or 
operating instructions), or which is being used for industrial, professional, commercial, or 
rental purposes.

c. This warranty will not apply to normal wear and tear or to expendable parts or accessories 

that may be supplied with the product which are expected to become inoperative or unusable 
after a reasonable period of use.

d. This warranty will not apply to routine maintenance and consumable items such as, but not 

limited to, fuel, lubricants, vacuum bags, blades, belts, sandpaper, bits, fluids, tune

-

ups, or 

adjustments.

e. This warranty will not apply where damage is caused by repairs made or attempted by others 

(i.e., persons not authorized by the manufacturer).

f.

This warranty will not apply to any product that was sold to the original purchaser as a 
reconditioned or refurbished product (unless otherwise specified in writing).

This Mastercraft

®

 product is guaranteed for a period of 3 

years from the date of original retail purchase against 
defects in workmanship and materials, except for the 
following component:

Component A: Accessories, which are guaranteed for a 
period of 1

-

year from the date of original retail purchase 

against defects in workmanship and materials.
Subject to the conditions and limitations described below, 
this product, if returned to us with proof of purchase within 
the stated warranty period and if covered under this 
warranty, will be repaired or replaced (with the same model, 
or one of equal value or specification), at our option. We will 
bear the cost of any repair or replacement and any costs of 
labor relating thereto.

Summary of Contents for 058-8179-2































Reviews: