to guarantee that the electric power tool functions without a problem. Damaged switches have
to be replaced by a qualified electrician. Do not use electric power tools if the power switch
cannot be turned on and off.
28.
WARNING!
The use of other insertion tools and accessories can present a danger of injury.
to you.
29. Let a specialist electrician repair your electric power tool. This electric power tool corresponds
to the applicable safety conditions. Repairs are only allowed to be carried out by a specialist
electrician, using original replacement parts; otherwise accidents may occur.
Additional safety guidelines for circular table saws
30. No other people may stand in the direct vicinity of the machine when it is in use. People not
operating the machine must maintain a suitable safe distance!
31. Never lay the power cable over the machine table!
32. Use the push rod to pass the workpiece safely into the saw blade! Do not come too close to
the saw blade!
33. Make sure that the thickness of the material to be cut is less than the maximum possible
cutting depth.
34. Never cut “hands-free”! The workpiece must always lie level on the machine table and
be moved along the stop! The workpiece must always be pressed hard against the stop!
35. Never cut workpieces that are so small that they cannot be safety pressed against the stop
and could turn!
36. Never cut workpieces that are so small that they cannot be moved by the push rod at a safe
distance from the saw blade!
37. Only cut one workpiece at a time! Never cut several workpieces simultaneously! Workpieces
must not be placed behind or on top of each other!
38. There is a danger of the workpiece “jamming” and slipping away!
39. Make sure that the workpiece cannot slip while cutting or get jammed in the saw blade!
40. Clean the work area and the workpiece after each cut.
41. Never reach into the openings of the device! Never insert objects into the openings of the device
(e.g. the saw blade casing, dust extraction adaptor). Danger of cuts! Never reach around or
over saw blade.
5
II. General safety guidelines (continued)
KEEP THIS USER’S MANUAL IN A SAFE PLACE FOR FUTURE REFERENCE
WARNING!
Switch the device off, remove the plug from the power socket and let the machine
come to a standstill! No foreign bodies are allowed to be on the workpiece or the machine
table! Cut pieces of the workpiece can be caught by the rotating cutting disc and be
flung from the tool and work area.
