GENERAL
DO NOT use solvents when cleaning plastic
parts. Plastics are susceptible to damage
from various types of commercial solvents
and may be damaged by their use. Use a
clean cloth to remove dirt, dust, oil, grease
etc.
Keep the air vents cleared of any built-up
dust to prevent the motor from overheating.
Remove accumulated dust and debris
regularly using a soft DRY brush.
DO NOT abuse power tools. Abusive practices
can damage the tool and the workpiece.
LUBRICATION
All of the bearings in this tool are lubricated
with a sufficient amount of high-grade
lubricant for the life of the unit under normal
conditions. Therefore, no further lubrication
is required.
WARNING!
DO NOT attempt to modify this chop saw or create accessories. Any such
alteration, modification or unintended use is misuse and could result in a hazardous
condition leading to possible serious injury. It will also void the warranty.
WARNING!
Use safety goggles when using an air jet to blow dust out of the chop saw.
WARNING!
Do not allow brake fluids, gasoline, petroleum-based products, penetrating
oils, etc. to come into contact with plastic parts. These substances contain chemicals that
can damage, weaken or destroy plastic.
WARNING!
When servicing, use only identical replacement parts. The use of any other
part may create a hazard or cause damage to the product.
MAINTENANCE
E
xPLODED VIEW
27
26
model no. 055-6705-8 contact us 1.800.689.9928
model no. 055-6705-8 contact us 1-800-689-9928
I
