background image

4

5

model no. 055-3505-2  |  contact us 1-800-689-9928

SPECIFICA

TIONS

SAFETY GUIDELINES

SPECIFICATIONS

Safety is a combination of common sense , staying alert, and knowing how the wet/dry sharpener works.

1.    

READ 

this entire Instruction Manual and become familiar with the information that it contains . Learn 

the applications,limitations, and possible hazards associated with wet/dry sharpener.

2.    

AVOID DANGEROUS CONDITIONS. DO NOT

 use power tools in wet or damp areas, and 

DO NOT

 

expose them to rain. Keep the work area well lit.

3.    

DO NOT 

use power tools in the presence of flammable liquids or gases.

4.    

ALWAYS

 keep your work area clean, uncluttered, and well-lit. 

DO NOT

 work on a floor surface that is 

slippery from sawdust or wax.

5.    

KEEP BYSTANDERS AT A SAFE DISTANCE FROM

 the work area, especially  when the tool is in use. 

Do not allow children or pets near the wet/dry sharpener.

6.    

DO NOT FORCE THE TOOL 

to do a job that it was not designed to do.

7.    

DRESS FOR SAFETY. DO NOT

 wear loose clothing, gloves, neckties, or jewellery (rings, watches, etc.) 

when operating the tool. Loose clothing and other items can get caught in moving parts and draw the 
operator in. 

Wear

 non-slip footwear, and tie back long hair.

8.    

WEAR A FACE MASK OR DUST MASK, 

because the sharpening operation produce dust.

9.    

UNPLUG

 the power cord plug from the electrical outlet when making adjustments, changing parts, 

cleaning, or working on the tool.

10.  

KEEP ALL GUARDS IN PLACE AND IN WORKING ORDER

.

11.  

AVOID ACCIDENTAL START-UPS.

 Verify that power switch is in the 

OFF

 position before plugging in 

the power cord.

12.  

DO NOT OVERREACH.

 Keep proper footing and balance at all times. Wear oil-resistant, rubber-soled 

footwear. Keep the floor clear of oil,scraps, and other debris.

13.  

MAINTAIN TOOLS PROPERLY.

 

ALWAYS 

keep tools clean and in good working order. Follow 

instructions for lubricating and changing accessories.

MODEL NUMbER

055-3505-2

MOTOR

120 V AC, 60 Hz, 0.8 A   

WET WHEEL
     Speed

170 RPM (no load)

     Size

4 x 2” (10.2 x 5.1 cm), 220 grit

DRY WHEEL      
     Speed

1,750 RPM (no load)

     Size

4 1/2 x 3/4” (11.4 x 1.9 cm), 36 grit

ARbOUR SIZE

1/2” (1.27 cm)

WEIGHT

12 lb (5.4 kg)

WARNING!

In order to avoid mistakes that could cause serious injury, read the following steps carefully and 
understand them thoroughly before plugging in the wet/dry sharpener.

Summary of Contents for 055-3505-2













Reviews: