21
VACUUM PORT
– cont’d
NOTE:
When cutting wood without using
the workshop vacuum, the vacuum port
baffle should be closed to limit the amount
of sawdust being exhausted toward the
operator.
WARNING:
The vacuum port baffle
MUST be in the closed position when
cutting metal to prevent hot cuttings from
hitting the operator.
WARNING:
Never attach a
workshop vacuum to the vacuum port
when cutting metal. The cuttings will be hot
and may cause a fire in the workshop
vacuum.
ASSEMBLY AND OPERATING
For safety reasons, the operator must
read the sections of this Owner’s
Manual entitled “GENERAL SAFETY
WARNINGS”, “POWER TOOL
SAF
ETY”, “SPECIFIC SAFETY
RULES”, “EXTENSION CORD SAFETY”
and “SYMBOLS” before using this
easy saw.
Verify the following every time the
easy saw is used:
1. Safety glasses, safety goggles, or
face shield are being worn.
2. Hearing protection is being worn.
3. The blade is in good condition.
4. The metal cutting shield is
installed before cutting metal.
5. All adjustment devices are tight
and any accessory is properly
tightened into the accessory
holder of the tool.
Failure to observe these safety rules
will significantly increase the risk of
injury.
WARNING
!
!
!
Summary of Contents for 054-8326-0
Page 14: ...14 CONTENTS...
Page 15: ...15 CONTENTS...
Page 35: ...35 EXPLODED VIEW...
Page 36: ...36 EXPLODED VIEW GUIDE TRACK...
