headline bars
continuation tabs
notes
warnings
model no. 054-8263-8 | contact us 1-800-689-9928
18
WORKING HINTS FOR YOUR TOOL
WORKING HINTS FOR YOUR TOOL
If your power tool becomes too hot, especially when used at low speed, set the speed to maximum and run
it with no-load for 2-3 minutes to cool the motor. Avoid prolonged usage at very low speeds. Always keep
the blade sharp.
Always ensure the workpiece is firmly held or clamped to prevent movement.
Any movement of the material may affect the quality of the cutting or sanding finish.
Start your tool before working and turn it off only after you stop working.
Do not start sanding without having the sandpaper fitted.
Do not allow the sandpaper to wear away; it will damage the sanding pad. The guarantee does not cover
sanding pad wear and tear.
Use coarse grit paper to sand rough surfaces, medium grit for smooth surfaces and fine grit for finishing
surfaces. If necessary, first make a test run on scrap material.
Excessive force will reduce the working efficiency and cause motor overload. Replacing the accessory
regularly will maintain optimum working efficiency.
