headline bars
continuation tabs
notes
warnings
13
OPERATING INSTRUCTIONS
BATTERY
A) BATTERY CHARGING
The battery charger supplied is matched to the Li-ion battery installed in the machine. Do not use another
battery charger.
The Li-ion battery is protected against deep discharging. When the battery is empty, the machine is
switched off by means of a protective circuit. The tool holder no longer rotates.
In a warm environment or after heavy use. The battery pack may become too hot to permit charging. Allow
time for the battery to cool down before recharging.
When the battery is charged for the first time and after prolonged storage, the battery will only accept
approximately 60% charge. However, after several charge and discharge cycles the battery will accept a
100% charge.
B) TO REMOVE OR INSTALL BATTERY PACK (Fig. A)
Depress the battery pack release button to release and
slide the battery pack out from your tool. After recharging,
slide it back into your tool. A simple push and slight
pressure will be sufficient.
1. MOUNTING ACCESSORIES
CAUTION:
For all work or when changing accessories,
always wear protective gloves and make sure battery is
removed. Avoid danger of injury from the sharp edges of the accessories. Accessories can become very hot
while working, presenting danger of burns.
NOTE:
Before using the tool, read the instruction book carefully.
FPO
WARNING:
• To reduce the risk of injury, do not let the sharp side of the accessory face back toward the user’s hand.
Fig.B
Fig.C
Fig.D
Fig.E
Fig.A
