headline bars
continuation tabs
notes
warnings
13
headline bars
continuation tabs
notes
warnings
model no. 054-8161-0 | contact us 1.800.689.9928
12
PIVOT SHOe
SLIdINg THe SHOe IN OR OUT
(fig 2a)
For maximum control and longer blade life, the base
assembly slides in or out to adjust the effective stroke
length.
1. Unplug the reciprocating saw from the power supply.
2. Loosen the two shoe-adjustment screws with the
hex key (supplied), and slide the shoe to the desired
position. The shoe can be locked in any position.
3. Tighten the shoe-adjustment screws to lock the shoe
in the desired position.
PIVOTINg THe SHOe
(fig 2b)
The shoe pivots to provide maximum control against the
surface being cut.
1
. Unplug the reciprocating saw from the power supply.
2. Hold the saw firmly, and then pivot the shoe to the
desired angle.
OPeRATINg INSTRUCTIONS
TURNINg THe SAw ON ANd Off ANd
CONTROLLINg THe SPeed
(fig 3)
Your reciprocating saw is equipped with a trigger switch
to turn the saw on and off, and to control the speed.
1. To start the saw, squeeze the trigger switch.
2. To stop the saw, release the trigger switch and allow
it to return to the OFF position.
3. To vary the speed, simply increase or decrease the
pressure on the trigger switch. The tighter the trigger
switch is squeezed, the higher the speed.
fig 3
ASSEMBL
Y INSTRUCTIONS
OPERA
TING
INSTRUCTIONS
wARNINg!
•
To avoid injury and damage, do not operate the saw without the pivoting shoe. The spindle
may strike against the workpiece and damage the reciprocating mechanism.
FPO
fig 2a
Pivot shoe
fig 2b
Pivot shoe
