headline bars
continuation tabs
notes
warnings
9
headline bars
continuation tabs
notes
warnings
model no. 054-8161-0 | contact us 1.800.689.9928
8
PACKAge CONTeNTS
Compact reciprocating saw, general-cutting blade, hex key and instruction manual
Key PARTS dIAgRAM
1
4
3
2
No.
Part
No.
Part
1
Handle
3
Tool-less Blade Clamp
2
Trigger Switch
4
Pivoting shoe
SAfeTy INSTRUCTIONS fOR ReCIPROCATINg SAw
• Hold the power tool by insulated gripping surfaces when performing an operation where the
cutting accessory may contact hidden wiring or its own cord.
If a cutting accessory contacts a “live”
wire, it may cause the exposed metal parts of the power tool to become“live” and shock the operator.
• Use clamps or another practical way to support the workpiece and secure it to a stable
platform.
Holding the work by hand or against your body leaves it unstable and may lead to loss of control.
• The label on your tool may include the following symbols. The symbols and their definitions are
as follows:
V ..................... Volts
A ..................... Amperes
Hz ................... Hertz
W .................... Watts
min ................. Minutes
............... Alternating current
............. Direct current
n
0
................... No load speed
............... Class II Construction
…/min ........... Revolutions or reciprocation per minute
............... Grounding terminal
BPM ............... Beats per minute
..............
WARNING – To reduce the risk of injury, user must read instruction manual
.
• The saw blade must be securely locked in its holder.
Check that it has been securely seated before
use.
• Make certain that all adjusting levers and the blade holder are tight before making a cut.
Loose
adjusting levers and holders can cause the tool or blade to slip; loss of control may result.
• Check that the switch is “off” before plugging the tool in or attaching a battery.
Accidental
starting could cause injury.
• Secure material before cutting.
Never hold the workpiece in your hand or across your legs. Small or thin
material may flex or vibrate with the blade, causing loss of control.
• Never touch the saw blade immediately after use.
It may be hot after prolonged use.
• Always wear safety goggles or eye protection when using this tool.
Use a dust mask or respirator if
cutting generates a great amount of dust.
• Keep hands away from the cutting area.
Do not reach under the material being cut. The proximity of the
blade to your hand is hidden from your sight.
• Do not use dull or damaged saw blades and accessories.
wARNINg!
•
Remove the reciprocating saw from the carton and examine it carefully. Do not discard
carton or any packaging material until all parts are examined.
•
If any part of the saw is missing or damaged, do not attach the reciprocating saw to a
power source until the damaged part is repaired or replaced.
FPO
KEY P
AR
TS DIAGRAM
SAFETY GUIDELINES
