headline bars
continuation tabs
notes
warnings
headline bars
continuation tabs
notes
warnings
headline bars
continuation tabs
notes
warnings
9
•
Keep your hands away from the motor-housing vents.
Hot gas comes from the vents
during operation.
•
Release the trigger immediately when a screw is tightened to avoid breaking the screw.
•
The label on your tool may include the following symbols. The symbols and their
definitions are as follows:
V ..................... Volts
A ..................... Amperes
Hz ................... Hertz
W .................... Watts
min ................. Minutes
................. Alternating current
or d.c ..... Direct current
n0 ................... No-load speed
............... Class II Construction
…/min ........... Revolutions or reciprocation per minute
............... Grounding terminal
BPM ............... Beats per minute
RPM ............... Revolutions per minute
..............
WARNING – To reduce the risk of injury, user must read instruction manual
.
.............. WARNING – To reduce the risk of injury always wear eye protection.
.............. WARNING – To reduce the risk of injury always wear ear protection.
•
Do not open the battery.
There is risk of a short circuit.
•
Protect the battery from heat and fire.
There is risk of explosion.
WARNING!
To reduce the risk of electric shock or damage to the charger and battery, use only the
Mastercraft
®
batteries and chargers listed.
BATTERY PACK
CHARGER
054-3124-0, 054-7553-4, 054-7557-6, 054-2434-8
054-3126-6, 054-7559-2
•
Keep the cord and charger from heat to prevent damage to the housing or internal parts.
•
For best results, your battery tool should be stored and used in a location where the
temperature is more than 5°C (41°F) but less than 40°C (104°F).
Do not store outside or in
vehicles.
SAFETY GUIDELINES