headline bars
continuation tabs
notes
warnings
headline bars
continuation tabs
notes
warnings
headline bars
continuation tabs
notes
warnings
model no. 054-7544-6 | contact us 1-800-689-9928
18
MAINTENANCE
The tool may be cleaned most effectively with compressed dry air. Always wear safety goggles when
cleaning tools with compressed air. Before each use:
•
Inspect the cordless hammer drill, the variable-speed trigger switch, and the cord for damage.
•
Check for damaged, missing, or worn parts.
•
Check for loose screws, misalignment or binding of moving parts, or any other condition that may
affect the operation.
•
If abnormal vibration or noise occurs, turn the cordless hammer drill off immediately, and have the
problem corrected before further use.
CHUCK REMOVAL
(fig 14)
The chuck can be removed and replaced with a new
one.
1. Lock the variable-speed trigger switch by placing
the direction-of-rotation selector in the centre
position.
2. Open the chuck jaws. Using a screwdriver, remove
the chuck screw by turning it clockwise.
3. Insert a 5/16” (8 mm) or larger hex key into the
chuck of the hammer drill and tighten the chuck
jaws securely.
4. Tap the hex key sharply with a mallet in a counter-clockwise direction. This will loosen the chuck for
easy removal.
5. Attach a new chuck to the spindle and tighten the chuck screw.
MAINTENANCE
fig 14
Mallet
Chuck jaws
Hex key
WARNING!
• To avoid personal injury, always remove the battery pack from the tool when cleaning or performing any maintenance.
• Do not let brake fluids, gasoline, petroleum-based products, penetrating oil, etc., come into contact with plastic parts. These
substances contain chemicals that can damage, weaken, or destroy plastic.
• When servicing, use only identical replacement parts. The use of any other parts may create a hazard or cause damage to
the product.
• Use only accessories that are recommended by the manufacturer for this hammer drill. Accessories that may be suitable for
one tool may become hazardous when used with another tool.
• To ensure safety and reliability, all repairs should be performed by a qualified service technician.
• Upon removal of the battery pack for disposal or recycling, cover the battery pack’s terminals with heavy-duty adhesive
tape. Do not attempt to destroy or disassemble battery pack or remove any of its components. Lithium-ion batteries must be
recycled or disposed of properly. Also, never touch both terminals with metal objects and/or body parts as short circuit may
result. Keep away from children. Failure to comply with these warnings could result in fire and/or serious injury.
FPO