headline bars
continuation tabs
notes
warnings
headline bars
continuation tabs
notes
warnings
headline bars
continuation tabs
notes
warnings
13
MAINTENANCE
BEFORE EACH USE:
1. Inspect the cordless polisher, the switch, and the accessories for damage.
2. Check for damaged, missing, or worn parts.
3. Check for loose screws, misalignment or binding of moving parts, or any other condition that may affect
the operation.
4. If abnormal vibration or noise occurs, turn the tool off immediately, and have the problem corrected before
further use.
The foam pad will retain its original shape and dimensions. Allow it to dry completely after each use.
Make sure to remove the bonnets, wash them, and store them separately.
The polisher should be stored with the pad facing up in order to extend pad life and retain its shape. Be
careful to not to use too much polish at one time. If the pad becomes saturated, it will not last as long.
MAINTENANCE
WARNING!
• To avoid accidents, always disconnect the tool from the battery pack before cleaning or performing any
maintenance. The tool may be cleaned most effectively with compressed, dry air. Always wear safety
goggles when cleaning tools with compressed air.
• Do not allow brake fluids, gasoline, petroleum-based products, penetrating oil, etc., to come into contact
with plastic parts. These substances contain chemicals that can damage, weaken, or destroy plastic.
• When servicing, use only identical replacement parts. The use of any other parts may create a hazard or
cause damage to the product.
• Use only accessories that are recommended for this tool. Accessories that may be suitable for one tool may
become hazardous when used with another tool.
• To ensure safety and reliability, all repairs should be performed by a qualified service technician.
FPO