headline bars
continuation tabs
notes
warnings
model no. 054-7274-8 | contact us 1-800-689-9928
13
12
MAINTENANCE
The tool may be cleaned most effectively with compressed dry air. Always wear safety goggles when
cleaning tools with compressed air. Before each use:
•
Inspect the tool, the trigger switch, and the cord for damage.
•
Check for damaged, missing, or worn parts.
Check for loose screws, misalignment or binding of moving parts, or any other condition that may
affect the operation.
If abnormal vibration or noise occurs, turn the cordless tool off immediately, and have the problem
corrected before further use.
TROUBLESHOOTING
Problem
Possible Causes
Solutions
The motor is
overheating.
Be sure the cooling vents are free
from dust and obstacles.
Clean, and clear the vents. Do not cover the
vents with your hand during operation.
If the problem remains unsolved after performing the checks described above, call the toll-free helpline
at 1-800-689-9928.
MAINTENANCE
TROUBLESHOO
TING
WARNING!
• To avoid personal injury, always unplug the tool when cleaning or performing any maintenance.
• Do not let brake fluids, gasoline, petroleum-based products, penetrating oil, etc., come into contact
with plastic parts. These substances contain chemicals that can damage, weaken, or destroy plastic.
• When servicing, use only identical replacement parts. The use of any other parts may create a hazard
or cause damage to the product.
• Use only accessories that are recommended for this sander by the manufacturer. Accessories that
may be suitable for one tool may become hazardous when used with another tool.
• To ensure safety and reliability, all repairs should be performed by a qualified service technician.
• If the supply cord is damaged, it must be replaced by a specially-prepared cord available through the
service organization.
FPO
Summary of Contents for 054-7274-8
Page 10: ......