ANGLE GRINDER - 054-7120-4
15
Mounting the wheel
(fig 5-6)
WARNING!
Only use grinding wheels for which
the maximum safe operating speed
is rated at or above 13200 RPM.
Never use damaged or imbalanced
grinding wheels. Do not exceed the
recommended wheel diameter. Grinding
wheel type 27 is recommended for use
on this grinder.
WARNING!
Failure to unplug the tool from the power source when assembling parts, making
adjustments, or changing application tools could result in accidental starting and cause
serious injury.
1. Unplug the angle grinder.
2. Make sure that the guard is securely in place. Depress the spindle-lock button. Loosen the outer
flange with the supplied wrench while holding the spindle-lock button down (fig 6).
3. Place the inner flange on the spindle; make sure that the flange is positioned so that the shape of
the opening in the flange corresponds with the shape at the base of the spindle.
4. Place the grinding wheel on the spindle. Check the rated speed on the grinding wheel. DO NOT use
a wheel with a rated speed lower than the speed shown on the grinder nameplate.
5. Thread the outer flange on the spindle with the flat side of the flange facing up, making sure that
the opening in the wheel is positioned around the raised portion of the outer flange (fig 5).
6. Press the spindle-lock button to prevent
movement of the spindle.
7. Keep the spindle-lock button depressed;
tighten the threaded outer flange by turning it
clockwise with the wrench (fig 6).
WARNING!
Keep the guard between you and
the wheel. Do not direct the guard
opening toward your body.
OPERA
TING INSTR
UCTIONS
fig 6
Spindle-lock
button
fig 5
Outer flange
Inner
flange
Spindle
Grinding
wheel