background image

20V max* LITHIUM-ION 1.5 AH RECHARGEABLE BATTERY - 054-3124-0

11

WARNING!

To ensure safety and reliability, all repairs should be performed by a qualified service 
technician.

WARNING!

When servicing, use only identical replacement parts. The use of any other parts may 
create a hazard or cause damage to the product.

WARNING!

To avoid serious personal injury, always remove the battery pack from the tool when 
cleaning or performing any maintenance.

WARNING!

Always wear safety goggles or safety glasses with side shields when using compressed air 
to clean the tool. If the operation is dusty, also wear a dust mask.

Batteries:

The battery pack is equipped with Lithium-Ion rechargeable batteries. The duration of use from each 
charge will depend on the type of work performed.

This battery pack has been designed to provide maximum trouble-free life. Like all batteries, they will 
eventually wear out. Do not disassemble the battery pack or attempt to replace the batteries. Handling 
of the batteries, especially when wearing rings and jewelry could result in a serious burn.

•  To obtain the longest possible battery life, read and understand the Instruction Manual.

•  It is good practice to unplug the charger and remove the Lithium-Ion battery pack when not in use.

FOR LITHIUM-ION BATTERY PACK STORAGE LONGER THAN 30 DAYS:

•  Store the Lithium-Ion battery pack where the temperature is below 26°C (80°F) and free of moisture.

•  Store Lithium-Ion battery packs in a 30%-50% charged condition.

•  Every six months of storage, fully charge the Lithium-Ion battery pack.

•  Exterior may be cleaned with a cloth or soft non-metallic brush.

Please see page 8 for disposal instructions.

MAINTENANCE

Summary of Contents for 054-3126-6

















































































Reviews: