16
ADJUSTING THE TORQUE
– cont’d
Your drill is equipped with an adjustable
torque clutch for driving different types of
screws into different types of materials. It
also has a setting for “drilling”. The proper
setting depends upon the type of material
and size of screw being used and the
function required.
Adjust the torque setting as follows:
1.
Identify the torque settings located on
the torque adjustment ring (1) (Fig. 5).
2.
Rotate adjustment ring to align the
correct torque setting number with the
torque indicator arrow (2). See the
chart on the following page for correct
torque settings.
1
–5 For driving small screws
6
–9 For driving medium sized screws
into soft materials
10
–13 For driving screws into soft &
medium-density materials
14
–17 For driving screws into
hardwood
18
–21 For driving large screws
For drilling. This position is
marked with a drill bit icon (3) on the
torque adjustment ring (Fig. 6).
ON-BOARD SCREWDRIVER BIT
STORAGE
1.
Convenient on-board screwdriver-bit
storage (1) is provided at the rear of
the drill housing (Fig. 7).
ASSEMBLY AND OPERATING
ASSEMBLY AND OPERATING
Fig. 5
Fig. 6
Fig. 7