11
headline bars
continuation tabs
notes
warnings
ASSEMBL
Y INSTRUCTIONS
Unplug heater and allow to cool.
1
Inspect heater for damage which may
have occurred during shipment. DO
NOT operate if any damage is noted.
Return damaged heater to retailer or
factory for repair or replacement.
1
Install heater to an overhead location
(SEE ASSEMBLY INSTRUCTIONS).
2
Plug heater into 120 V AC, 60 Hz AC
grounded outlet.
3
Rotate heater to aim in desired
direction.
4
Set power setting indicator to the
desired position by pulling the
pull-cord.
5
Remove screw from each arm.
2
Push in the two tabs on the outside of
each arm.
3
Grasp both arms and simultaneously
pull the unit down while holding the
tabs in.
4
REMOVING HEATER FROM MOUNTING BRACKET
OPERATING INSTRUCTIONS
