9
MULTIPLE VERTICAL ANGLES
INSTALLATION INSTRUCTIONS
WARNING:
To prevent possible electric shock, disconnect power to the heater at the main service box
before attempting to adjust the heat output of this unit.
NOTE:
To prevent possible overheating, please maintain adequate clearance as shown in Figure 5.
NOTE:
The louvers are designed so they cannot be completely closed. Do not attempt to defeat this
feature; damage to the unit can result.
Figure 5
Figure 6
ADJUSTING AIRFLOW DIRECTION
1. To turn the unit when it has been installed with a single lag bolt (as shown in Figure
3a), simply turn the entire heater as needed. The unit cannot be turned horizontally if
it has been installed with 2 lag bolts.
2. To tilt the unit vertically, loosen the bracket screws (see Figure 4).
3. Adjust louvers to the desired position.
Rotate
CEILING
45 degrees
67.5 degrees
90 degrees
KEY HOLES
