46
EN
The programmer may be used as a timer, with
•
the timer running independently of the pro-
gram.
Programming consists in pressing the button of the
selected function (e.g.
) and setting the desired
time using „+” setting button. You can adjust the time
using „-” setting button.
Pressing „+” or „-” setting buttons for a short time cau
-
ses change of time by one minute, and depressing
them for a longer time - activating the quick scroll
mode.
Programming:
press and release the button of the selected
–
function,
during the time up to 5 seconds after releasing of
–
the function key, set the required time using „+”
and possibly „-” setting buttons; if during these
5s programming is not started - the called func
-
tion will disappear,
after approx. 5s from the end of programming,
–
the programmer will display the current time and
starts to execute the program.
The following graphic symbols may appear on the
programmer display:
„
AUTO
” -
Automatic operation symbol
Continuous lighting means that the program is
being executed. Pulsing informs about the end
of the program (the programmer is waiting for
re-programming or switching over to the manual
operation cycle).
-
Locking symbol
The oven may be protected from change of set
-
tings or accidental activation, especially by chil
-
dren.
-
Oven operation signal
Continuous lighting signals operation of the oven
(providing that it is switched on).
-
Timer signal
Continuous lighting means that the timer is set.
A - Automatic operation;
B - Hours;
C - Oven operation symbol;
D - Minutes;
E - Timer symbol;
F - Lock symbol;
1 - timer button;
2 - operating time button;
3 - operation end button;
4 - manual operation button;
5 - time „decreasing” setting button;
6 - time „increasing” setting button
When the cooker has been connected to the
•
power supply mains, pulsating messages
„0.00” and „AUTO” appear on the program
-
mer display.
The first action which should be taken upon
•
connection of the cooker to power supply is
set-ting the current time.
The current time should be set also after de
-
•
cay of voltage in the mains lasting longer
than 5s.
Accuracy of the programmer readings de
-
•
pends on parameters of the supply mains,
therefore it should be adjusted periodically
by comparing it with another timer.
12.2 Setting the current time
simultaneously depress
–
and
buttons,
using „+” (and possibly „-”) setting button set the
–
required time e.g. 11.38,
when the time has been set, release all buttons.
–
During the time of approx. 5s from releasing of the
buttons, the time will be stored. The time set i.e.
11.38 will appear on the display. When the current
time is set, the oven will run in the manual mode.
12.3 Switching off the sound signal
After completion of each program, the oven will be
•
switched off automatically, and the sound signal
will be activated.
After certain time, the sound signal will be switched
•
off automatically.
The user may switch off the sound signal earlier by
•
depressing any button of the programmer.
12.4 Timer
The timer is designed for sound signalling when the
time set elapses. You can use it when performing
short time cooking operations (e.g. boiling eggs).
The timer does not switch the oven off.
when the time is being measured out by the ti
-
•
mer, you can program operation of the oven,
Summary of Contents for KGE-7336ZB Plus
Page 2: ...1 6 8 1 6 8 2 6 6 1 1 1 1 2 7 1 7 4 1 8 1 1 ...
Page 4: ...3 13 2 1 13 3 1 13 1 1 13 4 1 13 4 2 13 4 3 13 4 4 ...
Page 54: ...53 EN ...
Page 55: ...54 EN ...