11
EN
5/ DETERGENT PRODUCTS AND ADJUSTING THE WATER SOFTENER
EN
• FOR MULTI-PURPOSE PRODUCTS:
OPTION
Advice:
To provide better coverage of the wide range of multi-purpose products available, your
dishwasher’s “4-in-1” option has two possible settings, accessible via the “Set” button.
“Extra Dry”
improves the drying results in the event of reduced performance from the
“2-in-1”, “3-in-1”
or “4-in-1” types of multi-purpose product.
“Sparkling Clean”
enables you to prioritise the sparkle of your crockery whatever the type of
multi-purpose product used.
Important :
The multi-purpose products setting enables you to deactivate the rinsing and salt warning
lights only on
H0
and “
T
ABS
”.
• Loading multi-purpose tablets
To make loading the detergent easier, the distributor is located on the front of the upper basket; it
is compatible with all the products recommended for your dishwasher.
• Place the tablet
in the external compartment (Fig 04 on previous page)
or, for optimum ope-
ration, pull out the distributor’s drawer and lay the tablet there.
(Fig 05 on previous page).
- Close the distributor.
•
Proceed as follows to adjust the water softener on the control panel:
— Turn the selector to the “
Opcje
” position. The screen now displays SEL to indicate that you are
in the setting mode.
— Press the
“opóźniony start”
button
. The screen now displays the setting (factory setting of
H4
).
—
To use multipurpose tablets you must select setting
H0
or
HI
or
H2
,
according to the hardness
of the water.
— To change this setting (according to the hardness of the water) continue to press the
“opóźniony
start”
button. The setting changes every time you press the button.
: (light off) deactivates the "TABS" function.
:
(light on) activates the "TABS" function with the setting "Extra Dry".
:
(flashing light) activates the "TABS" function with the setting "Sparkling Clean".
— The setting is automatically validated when you exit “
Opcje
”, namely, when the selector is in the pro-
gramme or Stop position.
— The setting selected will be applied automatically; the "TABS" light will come on.
Testing strip
Hardness
0-10°F
10-18°F
18-25°F
0-1 mmol/l
1-1.8 mmol/l 1.8-2.5 mmol/l
Multi-purpose products
Function Deactivated
Multi-purpose products
“Extra Dry”
Multi-purpose products
“Sparkling Clean”
H0
H0
H0
H I
H I
H I
H2
H2
H2
• Your appliance can be specially set to use multi-purpose if the water hardness is
<
25°F or < 2,5 mmo/l.
