6
Assembly
5
Place silicone gasket onto back of element. Slide element through element bracket on heat shield, then align threaded
studs on element bracket with holes in back wall of smoker. On the back of the smoker, connect the yellow/green
ground wire to the top right threaded stud as shown below, then secure element with hex nuts. Place the element
gasket back into the opening.
X4
B
3
4
Yellow/Green
Ground Wire
Place star washer (E) over
the threaded stud first,
then the ground wire, lock
washer (D) and hex nut (B).
Element
Gasket
D
X1
E
X1
B
D
E
