4
SAFETY FEATURES
• The extension cord must be a grounding-type 3-wire cord.
• Outdoor extension cords must be used with outdoor use products and are marked with suffix “W” and
with the statement “Suitable for Use with Outdoor Appliances.”
• CAUTION - To reduce the risk of electric shock, keep extension cord connection dry and off the
ground.
• Do not let cord hang on or touch hot surfaces.
• Do not place cord on or near a gas or electric burner or in a heated oven.
• To disconnect, turn controller “OFF” then remove plug from outlet.
• Unplug from outlet when not in use and before cleaning. Allow appliance to cool completely before
adding/removing internal components.
• Do not clean this product with a water sprayer or the like.
• Grill should only be rolled on smooth surface.
• Grill should never be rolled up/down stairs or uneven surface.
• Potential damage to grill or harm to user may result from failure to follow warnings.
• Never open hopper during use. If it is necessary to refill charcoal during use follow the specific reload
instructions for this grill and always wear protective gloves.
• Never operate the grill with the temperature probe removed. This can cause the grill to overheat and
cause serious personal injury and/or damage to the grill.
• Install heat intake and air intake slides after every use.
• Remove heat intake and air intake slides before every use.
• Never operate the grill with the heat intake and air intake slides installed in the grill. This can damage
the grill.
WARNINGS AND IMPORTANT SAFEGUARDS
SAVE THESE INSTRUCTIONS
Lid Switch
–
Prevents grill from overheating.
• If the set temperature is
above
500°F (260°C) the controller will regulate the grill temperature
to 500°F (260°C) when the grill lid is opened. Once the lid is closed the grill will return to the set
temperature.
• If the set temperature is
below
500°F (260°C) the controller will continue to regulate the grill at the
set temperature when the grill lid is opened.
Hopper Switches
–
Reduces chimney effect when hopper is opened.
1. Hopper Lid Switch: The fan will stop when the hopper lid is opened. The fan will restart when the
hopper lid is closed.
2. Hopper Ash Door Switch: The fan will stop when the hopper ash door is opened. The fan will
restart when the hopper ash door is closed.