STEP 3.
Attach leg bracket (8) to right short
legs (9) as shown using phillips head
screws (A) and hex flange nuts (C).
Repeat step 3 on opposite side.
Do not fully tighten screws at this
time.
6
A
9
C
8
STEP 4.
Insert axle (12) through holes on
short right legs (9). Slide wheel (13)
onto axle and secure using cotter clip
(I). Snap axle cap (J) onto end of
wheel assembly as shown.
Repeat step on opposite side for
remaining wheel.
Do not fully tighten screws at this
time.
12
13
I
J
9
