Master V-450, Owner'S Manual

Page: 41 / 60

41
EN
Step 3
Tighten the Support frame (29) to the rail (22) with Hex bolt (25), flat washer (8) and nylon nut (16). Then
tighten the Support frame cover (28) to the Support frame (29) with Cross pan head screw (27), and tighten the
Support frame (29) to the L shape connector (54) with knob (2).
Step 4
Connect the truck wire (46) with the sensor wire (36).
Align the holes and then connect the rail (22) to the mainframe (1) with hex bolt (14), flat washer (8) and nylon
nut (9).Then put on the cap (70).At last, tighten it with knob(2) and flat washer(35) on the main frame(1).