NEVER LEAVE HEATER UNATTENDED WHILE BURNING
OR WHILE CONNECTED TO A POWER SOURCE
© 2017, Pinnacle Climate Technologies, Inc.
Kerosene Forced Air Heater User’s Manual
11
Maintenance (Continued)
8. Stop heater (See OPERATION, page 7).
9. If accessory pressure gauge is being used, remove pressure
gauge.
10. Replace fuel line, and plug in end of filter cover.
NOTE:
Use only original equipment replacement parts. Use of al-
ternate or third party components will void any warranty and may
cause unsafe operating conditions.
NOTE:
If heater does not ignite when heater is turned on, please
turn AIR VENT SCREW counter clockwise to release air, then turn
OPERATION SWITCH back on.
Wiring Diagram
PUMP PRESSURE ADJUSTMENT (Continued)
Pump Adjusting
Screw
Figure 12.
Pump Pressure Adjustment
